SECTION D20 - TASK 20
Current layer, instructions for older software & newer software.

Autocad Task 20 Return to Home Page

Task Twenty

Ensure that the Wcs is active (by typing ’ucs > w >’) and make layer 02 the current layer. Instructions for older software are next, and for newer software go to the bottom paragraph.

For older software, type ‘layer > s > 02’ followed by 2 returns.

For newer software, type ‘Layer >’ or click on the layer icon. The layer window will open. Pick layer 02 from the main body of the window so it is highlighted. In the top right of the window, pick ‘current.’ Finally, pick OK toward the bottom right of the window.


 A) ABOUT US  B) UNDERSTANDING 3D  C) INSTRUCTIONS
 D) GO TUTORIAL  E) FEEDBACK  F) ADVANCED TRAINING
Task 19 Top of Page On to Task 21

For a negligible fee (about the cost of a large cola drink) the full course AND CERTIFICATE can be printed in one go. The small sums it raises cover our costs for running the site. Click here for details.

<-D19 - D20 - D21->

ADDITIONAL RESOURCES

Search Resource

Google
Web www.3d-cadcea.co.uk

Please feel free to use the search facilities below for any (or all) of the following:-

Rendering tutorials
Autocad cars/vehicles
Autocad people
Autocad models
Autocad trees
Autocad plants
Autocad maps
Autocad furniture

Also covers technical information on Bolt dimensions, Engineering materials, etc, etc, etc.

Design of Bolted Joints. Bolted Joint design is often Critical

There is far more criticality associated with bolted joints than people are aware. Learn more and access the calculation tools simply click here and find out how to make threaded joints permanent.

Place a Link to our website

This website is a permanent and FREE training resource for both individuals and companies. Why not add a link to it from your company website? Simply click here and 'cut / paste' the code in to your website.

 Copyright © 1999-2007 3D CADCEA Ltd
Need technical help? Email us using the FEEDBACK page in Section E